questions regarding coffins cases

[Narukami]

I have 3 questions:

1) So I've been looking around for some coffin cases for the 350s, will the 350s (CDJ + Mixer) fit in a CDJ 400 (ditto) case?

2) How would I know if the case will my decks (if i was browsing online)

3) Does it matter if ther case was built for a different model (say DNS 1200)

bonus question:

I feel like such a no0b asking all these questions, are you guys annoyed?

[andyman]

Hey bud,

Whereabouts are you from?

if you check out ebay and gumtree, you can pick up cases for the smaller model CDJ's at a pretty reasonable price.

[Mitch]

Alot of the time they will state what sized gear the case is designed to hold

[SourceRaver]

Just google the CDjs for their dimensions. If the road case is slightly larger than required, its easy to pack it with foam rubber to stop movement. Just be careful that you dont buy a roadcase where the inside packing presses down on a CDj platter. They are touch sensitive and continuous pressure from a roadcase lid can damage this feature.

[Narukami]

i live in WA, i'll probably look around gumtree . Also, when I do check online, it doesn't have the model of the CDJ (like it's for a cdj 1000 instead) or it does have the model but it's only for one unit so i have to spend like another $100to but another case and another $100 for the mixer then i'd have to carry them one by one. i'd probably do what Raven says about the foam and stuff but i would like a case that fits (at least almost) perfectly with my gear so it looks more professional.

https://www.storedj.com.au/products/ROA-RRCDJDNS10W

^would this fit the 350s?

[opticon]

i live in WA, i'll probably look around gumtree . Also, when I do check online, it doesn't have the model of the CDJ (like it's for a cdj 1000 instead) or it does have the model but it's only for one unit so i have to spend like another $100to but another case and another $100 for the mixer then i'd have to carry them one by one. i'd probably do what Raven says about the foam and stuff but i would like a case that fits (at least almost) perfectly with my gear so it looks more professional.

https://www.storedj.com.au/products/ROA-RRCDJDNS10W

^would this fit the 350s?

I think the 350s are bigger than the 200's so probably not. Email the StoreDJ guys and they will help you out.

I put a wanted ad up on gumtree and a week or so later I had a coffin case to suit my 350 set for $150 from memory. Say in the add that you want need it to suit the CDJ 350\400 series to make sure it's the right size.

[SourceRaver]

Also check out TS as its a local WA forum:

http://www.teknoscape.com.au/forums/forumdisplay.php?11-Buy-and-Sell

Just put up a wanted post and I'm sure you'll get some responses (hopefully some will be relevant)

Regards,

The "Raven"

[RealRasputin]

I had a flightbag for my Pioneer-350s, which was really good. It wasn t that heavy like a flightcase and it was very solid, i used it for 1,5 years and i was always on tour with it, traveling by plane, train and car. No complains at all Plus i could put all my equipment into one bag, 2 cdjs, DJM-800 mixer, headphone cables and even my notebook.

[mattus123]

yea mr ch0w i tihnk that case would fit

the 350s are the same size as 400's arent they?

Hey SourceRaver how do you know if the inside padding is pushing too hard down on the platter?

cause i have often wondered if my padding is pushing down too hard on the platter

[SolDios]

There are only really 2 sizes when it comes to cdj's and mixers,

Mixers:

10"

DJM 350, 250, 400 ext..

12" DJM 700, 900, ext...

18" DJM 2000

Cd players:

Small

CDJ 350's, 400's ext

Large

CDJ 800's, 900's, 1000's

any thing that fit's one in the same class will be fine