Jump to content

Speaker Repairs in Sydney?


ongsta
 Share

Recommended Posts

Hi all!

Bought a pair of 15" EON G2's a few months ago and one of them seems to have a problem where it would play at full volume and then sound will cut out/become soft/distorted/fuzzy intermittenly. So it would be fine for a bit, and then start cutting out for a bit and the problem will come and go.

I'm not sure what it could be, has anybody experienced this before and are they aware of what may be causing it? It seems like an issue that would be caused from overheating but it still happens when the gain is turned slightly up, no way near the volumes it's capable of.

Any idea where I should start to see if this problem can be fixed by myself?

Secondly, if it definitely needs to be repaired by a specialist - does anybody know any decent repairers in Sydney?

Thanks,

Andy :)

Link to comment
Share on other sites

are these speakers you use when your playing/djing or just listening to music when your home?

They were purchased to use at my private gigs: birthdays/weddings etc.

EDIT: hehe they're a bit over-kill to use at home, I'm sure my neighbours wouldn't be too happy!

Link to comment
Share on other sites

are these speakers you use when your playing/djing or just listening to music when your home?

They were purchased to use at my private gigs: birthdays/weddings etc.

EDIT: hehe they're a bit over-kill to use at home, I'm sure my neighbours wouldn't be too happy!

maybe unrelated, but how often does your volume on your mixer clip into the red zone, having that maxed on 2 red bars all the time can fuck speakers up, see so many ppl doing it though

Link to comment
Share on other sites

Depending which model EON's you have, 15" G2 are powered speakers rated at 300 watts low-frequency and 100 watts

high-frequency (bi-amplified) - actual power delivered to the drivers.

1. I would check your audio cable first as these are powered speakers you'd be running extra long Audio from your mixer to the amp/speakers.

2. contact the Australian Distributor JANDS Australia

JANDS PTY LTD

40 Kent Road (Locked Bag 15)

Mascot, NSW 2020

T: +61 2 9582 0909

F: +61 2 9582 0999

web address: www.jands.com.au

Link to comment
Share on other sites

Depending which model EON's you have, 15" G2 are powered speakers rated at 300 watts low-frequency and 100 watts

high-frequency (bi-amplified) - actual power delivered to the drivers.

1. I would check your audio cable first as these are powered speakers you'd be running extra long Audio from your mixer to the amp/speakers.

2. contact the Australian Distributor JANDS Australia

JANDS PTY LTD

40 Kent Road (Locked Bag 15)

Mascot, NSW 2020

T: +61 2 9582 0909

F: +61 2 9582 0999

web address: http://www.jands.com.au

Thanks! I've tried different XLR cables, but I've never thought of trying a different power cable. I'll also give that a shot!

If all fails, I will be contacting JANDS. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...