Rane MP2016A Rotary Mixer

[Cupe]

* The Classic Rane MP2016

* As found in the Ministry of sound DJ Booth

* Six stereo input buses with four dedicated stereo phono/line preamps

* Two dedicated mic/line plus five stereo aux inputs

* Switchable effects loop

* Booth and tape outputs

* Optional XP 2016 with Active Crossfader and six 3-band tone controls

* New Version now with Split Cue

New version now with Split Cue

Finally the wait is over! For almost a decade, professional DJs have been waiting for a quality Rotary Mixer. Rane proudly presents the MP 2016 Rotary Mixer.

The MP 2016 is a rotary mixer featuring six input buses, Booth and House outputs, pre-effects tape output, post effects tape output with level control, switchable effects loop, and Headphone Cueing. Stereo buses 1 through 4 feature high quality RIAA phono preamplifiers which may be set for line input via rear panel switches. Stereo buses 5 and 6 each provide a balanced microphone preamplifier with input gain trim, mic/line switch, two-band EQ, microphone engage switch and internal Booth ducking enable jumper. In addition to the six dedicated preamplifiers, all six buses may select any of the five stereo auxiliary inputs.

Each input bus provides a six-position source selector, input gain control for matching levels, signal/overload indicators and a studio grade 40 mm Master Mix control.

The Booth output may select Master or Cue as its source. An ultra-low noise, high power headphone amplifier also allows monitoring the Master mix or Cue.

The Master mix circuit provides signal/overload indicators, Mono switch and high-pass rumble filters. In addition, the MP 2016 features patent pending high performance three-band, full-cut, Accelerated-Slope tone controls.

The MP 2016 provides exceptional ergonomics, good feel and a clean, intuitive layout packaged in a compact 19 inch, 3U rack mount chassis, a scant five inches deep.

So you say, "Great, but to accommodate the diverse needs of all DJ mixing styles, I need dedicated high performance three-band, full-cut, Accelerated-Slope tone controls for each of the six input buses, high-performance Active-Crossfader with full range contour control, A-Post-B crossfader assign switches and a stereo, 10 segment, peak dBu Master/Cue meter with peak hold; all without effecting the ergonomics of my classic rotary mixer."

We've got you covered! With the flip of a switch on the MP 2016 front panel, you can engage the optional XP 2016 External Processor and acquire all of the features listed above. A single cable connects the XP 2016 to the MP 2016. The XP 2016 also features excellent ergonomics packaged in a compact 19 inch, 3U rack mount chassis, five inches deep.

[defanutley]

has anyone used one of these?